Clik here to view.
Re: Node is up but Overall hardware status unknown
Hi Jon, Thanks for reply, I already removed and add the device on server, but still no luck and for resetting the polling engine on Orion server, how exactly can i do this guide me please. i tried...
View ArticleRe: Monitor power supplies...
HelloI tried this but still not getting the output. I copied the above reports and pasted in orion reports and when I try to open the reports, it displays nothing.
View ArticleRe: Monitor power supplies...
Hi, When you add a new OID you must type Snmp OID of power supply name to custom label field (for match power supply name and status). You can find in the following...
View ArticleRe: C# Update node fields example / toggle managed unmanaged
(1) create a new C# project (2) add reference to your SW-Orion Webservices as "orion_misc.SWIS.Informa...."(3) this is part of my code... ....ServicePointManager.ServerCertificateValidationCallback =...
View ArticleHow i can see total usage data of endpoint user in network.
Dear Team, How i can see total usage data of endpoint user in network.?
View ArticleRe: How to configure BGP alerting ?
You can also use syslog alerting to email you on any BGP neighbour changes.
View ArticleRe: How to configure BGP alerting ?
If you are using NPM v10.5, you can configure advanced alert using "Routing Neighbours" property. if you want to stay with v10.4, you can use UDP
View ArticleUDT Wireless Issue
Hi All I've just purchased UDT and IP Address Manager but I'm having an issue with the wireless module When I click on the Thin Access point the current endpoint connections are incorrect and I have...
View ArticleRe: Can't display wireless clients
hi rlawsha.. how did you add wireless access point in orion npm? in my case my wireless summary view is empty. thanks
View ArticleNPM 10.5 routing monitor
How can I disable routing table resource from being monitored for 95% of my devices? Do I have to go one by one or there is a faster way for this? br
View ArticleRe: Beta v 4 - install problems
aLTeReGo,Yes after the .Net 4.0 was manually installed, it all went well, including connecting to the remote SQL server, which proved troublesome during the v3 installation. Thanks
View ArticleRe: Customize Report
There is several options to create similar report as described:1) to use report Call in Last 24 hours - similar report but the status which is presented by Origin/Destination Cause 2) to create report...
View ArticleClik here to view.
Vista Alert Detected with NTSecurity Tool??????
Good Morning Guys, Slightly confused here and I'm hoping you guys will be able to help me out. Over the last few days several of our Windows Agents have reported the following events under "LEM...
View ArticleRe: How i can see total usage data of endpoint user in network.
Hi Shisheer,At the moment we have this PDF which details the steps required to get it setup http://www.netfort.com/sites/default/files/downloads/LANGuardian-SolarWinds-integration-pack.pdf In a couple...
View ArticleRe: Get error configuring IMAP access to Exchange 2010
Hi, I have exactly the same problem, we use exchange 2010 too (pop or imap) : DEBUG: setDebug: JavaMail version 1.4.5DEBUG: getProvider() returning...
View ArticleRe: Migrate DB from OS X 10.6 > vsphere centos
Hi,the original KB contains basic instructions only and will be replaced by KB with advanced instructions. Here is the draft, but you should hopefully find all details you need. Two important things to...
View ArticleRe: How i can see total usage data of endpoint user in network.
Hi Darragh, i tried the same , but its not working. Shisheer
View ArticleRe: vCenter connection failing again
It looks like a problem with certificates. Check vCenter certificate whether it is valid.To NPM be able to poll vCenter then you should be able to connect to https://ipAddressOfvCenter/sdk with...
View ArticleRe: VM Network Traffic
Hello,Hyper-V monitoring is available since NPM 10.4. Set up instruction you can find in SAM admin guide - http://www.solarwinds.com/documentation/apm/docs/SAMAdminGuide.pdf in a chapter "Hyper-V...
View ArticleRe: Initial configuration
I don't think I entirely follow. Are you trying to copy/paste users like CSRManager into each domain? Or, are you saying that user imports into the DB breaks authentication for existing users in the DB?
View Article